ENEXT

ENEXT HOME

Bluetooth enabled charging station for home users

The eNext Home is a bluetooth enabled wall mounted charging station for home users that provides a range of features accessible via the Circontrol Hi Charger smart phone application. The eNext comes in single phase 7 kW and three phase 22 kW versions.

The eNext has a number of unique bluetooth related features such as remote configuration, access locked to phone and proximity charging. The station will automatically start charging when it detects the owner’s phone after the car is plugged in. This feature is useful in situations where the charging station is located in an area that could be accessible to other drivers. The eNEXT can be programmed for interval charging so as to take advantage of cheap charging periods. Bluetooth control is optional and can be switched off. The station reverts to plug and go which is its default behaviour out of the box. The station can be wall mounted or pole mounted. 

Features include: —

  • Access Control and Charging station configuration via a smart phone application.
  • Presence Recognition – the charging station can be programmed to activate when the driver’s smart phone comes within 2 meters. This feature that allows the driver to start charging without any interaction with the device.
  • Programmable scheduled charging.
  • Compatible with the BeOn CT clamp for load balancing.
  • Wall-box design, additional Pedestal available for Floor Mounted Installation.
  • Available in Single Phase (7kw) & Three Phase (22kw).
  • Wall mounted or pole mounted.
Contact us

ENext Elite

Networked charging station for business users

The ENext Elite is a networked charging station for business users. The station is OCPP compliant and compatible with any OCPP compliant charging station network management system. The station has an NMI R-46 (OIML R46/Mid Certified) compliant meter, embedded 4G modem, wi-fi, ethernet and an RFID card reader. The station has on-board DC leakage protection. Outlets can be socket only or tethered cable. The station can be connected to a Beon CT clamp for static load control. The station can respond to demand response grid utility load management signals via a contactor open and closed by a remote signal. The station can be wall mounted or pole mounted. 

FEATURES

  • The charger’s housing is made of ABS plastic which is both robust and UV resistant, providing protection against mechanical stress and severe environmental conditions.
  • Communications via ethernet port, 4G/ modem (optional) and Wi-Fi.
  • Compatible with the Circontrol THOR proprietary dynamic load management system and cross-platform OCPP smart charging systems.
  • The eNext Elite guarantees the best level of protection thanks to integrated DC leakage detection and welded contact detection.
  • NMI R-46 (OIML R46/Mid Certified) compliant meter,
  • Clear charging instructions and operating status are shown on the bright LCD display.
  • The eNext Elite offers flexible authentication, meaning that the user can authenticate either before or after connecting the cable to the EV. Additionally, the authentication process can also be disabled for the Connect n‘Charge mode.
  • Remotely activate charging of the eNext Elite through an external ON/OFF signal (a timer, for example).
  • Scheduling features available via the on-board web configuration page. Only charge at set times and at set amps.
  • Wall mounted or pole mounted.
order now
Click here to check out the Beon CT Clamp for load balancing

eNext

  • App
  • App charge authorization
  • 6mA leakage detector
  • HOME BeOn compatible

eNext Elite

  • Colour display
  • MID Energy Meter
  • 4G / Wi-Fi
  • OCPP 1.6 (2.0 ready)
  • RFID reader
  • 6mA leakage detector
  • HOME BeOn compatible

Download the eNext Installation Manual

Download the eNext Datasheet

Download the eNext User Manual

Download the ENext Bollard Manual

Download the eNext Elite Installation Manual

Download the eNext Elite Datasheet

Download the eNext Elite User Manual

NEW MODERN DESIGN

Urban and elegant design with painstaking attention to detail. There is space on the front of the wall box that could be used for branding and advertising.

SUITABLE FOR INDOOR 0R OUTDOOR USE

The charger’s housing is made of ABS plastic which is both robust and UV resistant, providing protection against both mechanical stress and severe environmental conditions.

CIRCONTROL HICHARGE APP

  • Control the status of the ongoing charging session.
  • Real time info such as elapsed time and battery status.
  • Presence recognition by smartphone’s Bluetooth
  • Time Schedule – only charge during off peak time.
  • Status and error diagnosis to facilitate maintenance.
  • The app can connect to multiple charging stations.
  • Remote firmware updates via Hi Charge App.

BEON COMPATIBLE

Compatible with the BeON current clamp sensor (accessory). The Beon dials down the charge supplied to the car when the total amount of power drawn by the electrical devices in the house reaches the limit specified on the main circuit breaker which is 63 amps for a single phase house and 32 amps per phase for a three phase house in WA.

PERFECT EV CHARGER FOR YOUR NEEDS

  • Supplied as Type 2 socket or Type 2 fixed tethered cable.
  • Single or 3 phase with optional MCB & DC leakage protection.
  • Welding contactor detection (safety standard IEC 61851-1)
  • LED bar informs the user about the charger status
  • Robust and UV resistant design used indoor or outdoor

DOWNLOAD HICHARGER APP

The Circontrol HiCharge smart phone app allows remote programming of the eNext including time scheduling, diagnostics, firmware upgrades and proximity access control.